Liquid-Cooled engines will last several times the hours of air-cooled models. All Winco liquid-cooled generators operate at 1,800 rpm improving life and fuel economy. The GM Vortec industrial engines start quickly in an emergency and with electronic fuel and governor controls your standby generator will meet the most stringent generator standards. The emergency generators are outfitted with sophisticated safety controls that protect your emergency generator and home from damage. The control constantly monitors engine and electrical inputs and outputs to make sure everything is performing to standards. If a dangerous condition occurs, the generator will automatically shut itself off. The best part is that there isn't any guessing. The generator provides error codes with vital diagnostic information. Winco liquid-cooled generators are normally available from inventory from 21 - 90 kilowatts.
The housing on each WINCO packaged standby generator is designed to extend equipment life and reduce noise. Each housing is constructed of galvaneal steel. The sheet steel is treated with a galvaneal coating which inhibits rust even if the paint layer is damaged. After each piece of sheet steel is punched and formed in our facility it is washed in a multi-phase phosphate system. The part is then powder coated and baked in the oven to cure the paint. The final result is an incredibly durable part that can withstand the elements without compromising structural strength. WINCO also uses design features like solid roof designs, drip edges and baffle systems to keep the weather out, protecting your investment. A sound absorbent foam is applied to the inside of the housing to reduce the noise and the baffles prevent direct lines for noise to escape the enclosure.
120 / 208 3-PH
120 / 240 3-PH
277 / 480 3-PH