Standard Features
Request a Quote


Get to work with Kubota's most powerful MX Series 4WD utility tractor yet, equipped with a 61.4 horsepower Tier 4 Final Kubota diesel engine. The improved operator deck with high back suspension seat and new dash panel ramp up comfort while the HST transmission assures smooth performance and productivity. It's everything you want in a utility tractor.


Model Year
Request a Quote


125.2 in. (3,180 mm) without 3P
95.7 in. (2,430 mm) with foldable ROPS
69.7 in. (1,770 mm) (min.)
3,734 lbs. (1,576 kg) with ROPS
74.6 in. (1,694 mm)
Turning Radius
8.9 ft. (2.7 m) with brake
Ground Clearance
15.9 in. (405 mm) (min.)


Engine Make
Engine Model
Engine Type
Gross Horsepower
61.4 hp (45.8 kW)
Net Horsepower
57.5 hp (42.9 kW)
148.6 ci (2,434 cc)
Fuel Type
Fuel Tank Capacity
13.5 gal. (51 l)
Air Cleaner
Dry-dual element


Transmission Type
Hydrostatic pedal operate shuttle
Number of Speeds
Drive Type
7.5L-15 front
14.9-26 rear
Mechanical wet disc
Speed - Forward
0 - 16.1 mph (0 - 25.9 km/h)
Speed - Reverse
0 - 14.5 mph (0 - 23.3 km/h)
Hydrostatic power




Hydraulic System
Control: Position
Standard Pump Flow
Main: 9.5 gpm (35.8 lpm)
Power Steering: 4.9 gpm (18.6 lpm)


Lift Capacity
2,310 lbs. (1,050 kg) @ 24 in. behind lift point
Power Take-Off
Live independent, hydraulic PTO with PTO brake, wet clutch
PTO Horsepower
45.7 hp (34.1 kW)
PTO Speed
540 rpm
Category I and II

Standard Features

More Powerful and Clean Engine
 Kubota takes tractor performance to the next level. In response to growing environmental awareness, the new MX engines also employ a Common Rail System (CRS) and Diesel Particulate Filter (DPF) for cleaner emissions that comply with the latest EPA Tier 4 Final emission regulations, and direct fuel injection for better fuel economy.  
HST Transmission
 Kubota's new MX5200 models feature hydraulic servo HST systems that increase pedal responsiveness, and ease on pedal-shifting for smooth performance and improved control, regardless of load size. Forward and reverse directional changes are simple. HST also reduces shock, vibration, noise and fatigue to improve tractor performance and operator comfort.  
 Cruise Control is standard, a great feature for mowing applications; just preset your travel speed then remove your foot from the HST pedal.  
Gear Drive Transmission with Synchro Shuttle Shift
 Kubotaís Synchro Shuttle Transmission lets you spring into action with smooth control and powerful agility. Four main shift speeds and two range-shift speeds (hi / lo), give you eight forward and eight reverse speeds for the versatility you need to maximize productivity. The shuttle lever is conveniently located at the left side of the seat for quick and easy switching between forward and reverse. Itís particularly handy for tasks that require repetitive forward / reverse motions, like front loader work.  
Bevel Gear Front Axle
 A superior feature that delivers an extremely tight turning radius with full power transfer to the wheels at every steering angle.  
High-Back Suspension Seat
 Work has never been this comfortable. The new suspension seat with a high seatback offers greater comfort and minimal back fatigue even after a long dayís work. The luxurious design is also pleasing to the eye.  
New Dash Panel
 The newly designed dash panel with larger and easy-to-read gauges and digital LCD panel with parking indicator provide all the vital information you need for your MX tractor  
Operator Comfort
 Kick back, relax, and get working. The full-flat deck enables safe and easy mounting / dismounting, and the 30 spacious inches between fenders gives you all the room you need to work in comfort. In addition, the easy-to-operate hanging pedals optimize legroom. For really thirsty work, the convenient cup holder will always keep your beverage within easy reach.  
Easy Handling and Maneuverability
 Traveling from site to site has never been easier. Both two-wheel drive and four-wheel drive models come equipped with a smooth, easy-turn, hydrostatic power steering. And their right-size dimensions and small turning radius make maneuvering in tight spots a breeze. The brake pedals for HST models are located on the left side for easier operation and smoother turning.  
Accelerator Lever
 Rev up the engine with fingertip operation. The handy accelerator lever is readily at hand next to the steering wheel when you need that extra power to get out of tight situations or when hauling that extra load.  
One-Touch Electric PTO Switch
 Our new PTO switch makes PTO operation easier than ever. Conveniently located on the right side console, Push and turn starts and one push stops the PTO.  
Full-Opening One-Piece Hood
 The newly designed slanted hood, and new halogen headlights provide a more powerful appearance and better visibility. The full-opening one-piece hood is made from steel for added strength and features hydraulic dampers for easier opening, so you can perform routine maintenance quickly and efficiently.  
Easier Cleaning and Maintenance
 The new MX Series is designed to make daily maintenance easy. For fast cleaning, the radiator screen can be removed from either side of the tractor. The air filter, battery, tray, and coolant recovery tank are readily accessible.  
Large Fuel Tank
 The new MX fuel tank is now larger with an ample 13.5 gallons capacity, so you can operate longer with less fill ups.  
Grill Guard
 The grill guard provides a robust level of protection and easily tilts forward for opening the hood.  
3-Point Hitch
 The powerful Category II 3-Point Hitch is convertible to Category I easily handles correctly matched Implements. Rigid link ends are standard on the MX5200 models, with telescoping link ends and stabilizers on the MX5200 4WD models, such a great feature. The telescoping lower links make hooking up and working with large implements easier.  
Draw Bar
 The newly adopted drawbar has a 1.3 inch drawbar pin hole that accepts a standard size 2.25 inch drawbar pin.  
Cup Holder
 This convenient holder securely fits a cup or a mug to keep operators hydrated on the job.  
Tool Box
 A large tool box is located right behind the operator's seat for easy access. Models with the backhoe will have the tool box above the left fender, next to the operator's seat  

Request a Quote

 US/US TERR.  Canada  Mexico  OTHER INTN'L LOC.
  • *First Name:
  • *Last Name:
  • Business Name:
  • Title:

  • *Address:
  • *City:
  • *State:
  • *ZIP Code:

  • *Phone:
  • Work Phone:
  • *Email:

  • Comments:

  • Where did you hear about us?

Have a trade in?

  • Trade in Mfg:
  • Trade in Model:
  • Trade in Year:
  • Trade in Miles/Hours:

  • Trade-In Accessories:
  • All Kubota sales must be made in person.
    • Please check here if you would like to receive Email notifications of promotions, sales and special events.
    Invalid Captcha. Please check the box.
    To help us prevent spam, please check the box below.

    *Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.