Specs
Standard Features
Request a Quote

Specs

Manufacturer
Kubota
Model Year
2017
Model
M108S Low Profile - M108SDSL
M.S.R.P.
Request a Quote

Measurements

Length
160 in. (4,120 mm)
Height
91 in. (2,300 mm)
69 in. (1,765 mm) ROPS folded
Width
84 in. (2,130 mm)
Weight
6,526 lbs. (2,960 kg)
Wheelbase
95.9 in. (2,435 mm)
Turning Radius
14.8 ft. (4.5 m) without brake
Ground Clearance
12.2 in. (310 mm) (drawbar bracket)

Engine

Engine Make
Kubota
Engine Model
V3800-DT-TI
Engine Type
E-CDIS
Net Horsepower
108 hp (74.6 kW) @ 2,600 rpm
Displacement
230 ci (3,769 cc)
Cylinders
4
Injection
Direct
Aspiration
Turbocharged with intercooler
Cooling
Liquid
Fuel Tank Capacity
46 gal. (175 l)
Air Cleaner
Dry, dual-element

Drivetrain

Transmission Type
Hydraulic shuttle, column mounted lever
Number of Speeds
32 forward, 32 reverse
4WD Drive System
Bevel gear type
Tires
9.5-20 R1 front
16.9-24 R1 rear
Brakes
Hydraulic wet discs
Steering
Hydrostatic power steering

Electrical

Alternator
45A

Hydraulics

Maximum Pump Flow
3-point Hitch: 17.2 gpm (65 lpm)

Operational

Lift Capacity
4,630 lbs. (2,100 kg) @ 24 in. behind lift point
Power Take-Off
Hydraulic independent PTO, with PTO brake, multi-plate wet discs
PTO Horsepower
96 hp (71.6 kW)
PTO Speed
540 rpm
Hitch
Category II

Standard Features

Low Profile
 With lower overall height and a lower profile, the M108S is perfect for low-clearance applications, especially orchard work. The tractor height reaches a modest 91 inches with ROPS upright (69 inches with ROPS folded) and boasts a host of ergonomic features including low fenders, a special operator station and a lower foldable ROPS frame, all specifically designed for this type of work. Yet, with all these features the M108S still provides the power and durability you've come to expect from a Kubota tractor.  
Adjustable Fenders
 The rounded fenders of the M108S provide two height settings depending on the tire size—the low setting is 55.7 inches and the high setting is 58.1 inches. The fenders are also free of lever guards and hazard lamps to prevent low-hanging limbs or branches from getting caught.  
New Engine
 The engine of the M108X has been redesigned and reengineered. Of course, it boasts the same durability and quality you’ve come to expect from Kubota E-CDIS diesel engines. But, this new turbocharged engine is now cleaner than ever before and offers higher torque and incredible pulling power. The CRS (Common Rail System) and Cooled EGR (Exhaust Gas Recirculation) System reduce emissions, helping with compliance to U.S. EPA Tier III emissions regulations. We've increased horsepower to 108 and PTO power to 96 horsepower.  
CRS (Common Rail System)
 Typically found in automobiles to help reduce emissions and decrease fuel consumption, CRS has been implemented on our M108S engine to accomplish the same results. The CRS electronically controls the timing and amount of fuel injection. By delivering high-pressure injections in stages, rather than all at once, an optimal combustion rate is achieved, thus offering greater efficiency in the cylinder. This equates into less combustion noise, commonly known as "diesel knocks", better fuel efficiency and cleaner emissions. By controlling the amount of fuel injection, the CRS also serves to provide greater torque so that operations in the mid-to-high revolution range, such as baling, can be performed more smoothly.  
Cooled ERG System
 Our Cooled EGR (Exhaust Gas Recirculation) System aims at the same end as the CRS; to reduce noxious emissions. Specifically, the Cooled EGR System reduces smog-producing nitrogen oxides by lowering the combustion temperature. It accomplishes this by diverting exhaust gas through a cooler and then returning it to the combustion chambers, where the cooled gases minimize temperatures and hamper nitrogen oxide formation.  
LCD readout
 The new LCD readout makes viewing the vital functions of your tractor clear and easy. View travel speed, PTO revolution, and hour meter information digitally. Illuminated analog indicators include a large tachometer, temperature gauge and fuel gauge. A 4WD indicator and battery warning light have also been added to keep you informed.  
New Halogen Headlights with Corner Lamps
 We've mounted the headlights higher to improve visibility, even during loader work. These halogen lights with corner lamps are efficient and provide excellent illumination.  

Request a Quote

 US/US TERR.  Canada  Mexico  OTHER INTN'L LOC.
  • *First Name:
  • *Last Name:
  • Business Name:
  • Title:

  • *Address:
  • *City:
  • *State:
  • *ZIP Code:

  • *Phone:
  • Work Phone:
  • *Email:

  • Comments:

  • Where did you hear about us?

Have a trade in?

  • Trade in Mfg:
  • Trade in Model:
  • Trade in Year:
  • Trade in Miles/Hours:

  • Trade-In Accessories:
  • All Kubota sales must be made in person.
    • Please check here if you would like to receive Email notifications of promotions, sales and special events.
    Invalid Captcha. Please check the box.
    To help us prevent spam, please check the box below.

    *Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.