Standard Features


The RCP2660 and RCPM2660 hydraulic parallel arm rotary cutters provide excellent cutting performances on ditch banks and other sloping areas adjacent to right-of-ways, lakes, ponds and streams. The RCP26 works equally as well in and around areas of restricted access such as over or under fences, guardrails, low overhanging branches, tree limbs and hedges. These units perform extremely well in tall grass cutting applications and will easily cut through standing brush up to two inches in diameter. The optional gauge wheel package allows the cutter deck to float over undulations without having to constantly monitor terrain conditions.

The RCP2660 and RCPM2660 cutters are adapted for Category 2 or 3 three-point hitch mounting on 75-150 horsepower tractors weighing 7,000 pounds or more. Pump and reservoir system require either 540 or 1,000 rpm input. Cutter drive and tractor need to be equipped with, depending upon hydraulic configuration, one to four hydraulic outlets to operate the cutter’s parallel arms and deck.

The RCP3060 offers a horizontal cutting reach of 18 foot 10 inches, which is a three foot longer reach than the RCP26 Series model. The 30 Series is great for those roadsides that want a manicured look further down the ditch, or being able to stay a little further away from the soggy banks of the pond.


Land Pride
Model Year
Request a Quote


19 ft. 8 in. (fully extended)
1,690 lbs. (no fluid and without gauge wheels)
Cutting Width
58 in.
Cutting Height
Minimum: 2 in. (deck level)


Cutting Capacity
2 in. max.
Blade Size
1/2 x 4 in.
Blade Tip Speed
15,000 fpm
Deck Thickness
10 ga.


Driveline -- Center
ASAE Cat. 2
Skid Shoes
1/4 in. reversible
Tractor PTO Speed
540 rpm
3-point Cat. 2 and 3
Lower Hitch: Clevis
Quick-Hitch Adaptable: Yes
Tractor Size
Horsepower: 75 hp

Standard Features

 Tractor Range:
  • RCP(M)2660 designed for 75-150 hp tractor with minimum weight of 8,000 lbs.
  • RCP(M)3060designed for 95-175 hp tractor with minimum weight of 12,000 lbs.
     Gearbox Rating: 150 hp  
     3-point design does not tie up a tractor, 3-point hook up is easy to hook up and remove from tractor  
     Visibility of the rotary tiller deck is captured from the operator’s seat, easy to see operation, operator does not have to look behind  
     Factory assembled (arrives ready for the customer, saves time and money - excluding fluids and hydraulic valve)  
     All grease ports are easily accessible for servicing  
     10 ft. transport width folds-up close to the tractor  
     No weight brackets or decks hanging away from the tractor  
     Typically, not much wider than the tractor, which means safer transporting  
     3-cylinders used in a parallel arm design allows any cylinder to be adjusted without changing the position of the others (means less positioning)  
     Long Horizontal Reach:
  • RCP(M)2660 = 15 ft. 6 in. (186 in.) good access for reaching vegetation far away from the tractor
  • RCP(M)3060 = 18 ft. 10 in. (226 in.) better access for reaching vegetation far away from the tractor
     Above Grade Vertical Reach:
  • RCP(M)2660 = 11 ft. 5 in. (137 in.) good access for reaching up embankments and cutting low over hanging limbs
  • RCP(M)3060 = 13 ft. 5 in. (161 in.) better access for reaching up embankments and cutting low over hanging limbs
     Below Grade Reach:
  • RCP(M)2660 = 9 ft. 1 in. (109 in.) good access for reaching down embankments
  • RCP(M)3060 = 11 ft. (132 in.) better access for reaching down embankments
     180° operating tilt arc cutter head can be positioned to reach different angles  
     Cat. 2 and 3; 540 or 1,000 rpm fits a wide variety of tractors  
     35 gal. oil reservoir maintains optimum fluid temperatures and also serves as counterweight  
     2 in. cutting capacity is ideal for trimming brush  
     High blade tip speed (15,000 fpm) means cleaner cutting  
     2 parking stands easy and level storage, makes it easy for hooking to tractor  
     In-line filter cleans hydraulic fluid before it re-enters the reservoir  
     Shut-off valve permits maintenance with minimum oil loss  
     Built-in auxiliary weight rack on left side, suitcase weights can be added to left side for balance  
     Oil pressure gauge - easily monitor oil pressure for optimum performance of unit  
     Hydraulic breakaway allows the parallel arms to pivot backwards to avoid obstacles and to protect rotary tiller deck and parallel arms  
     Parallel arms are pivoted back to normal operating position with the hydraulic breakaway cylinder  
     Flow control valve (supplied with solenoid controlled options) compensates for various tractor hydraulic systems so proper hydraulic fluid pressure can be maintained  
     Solenoid controlled cylinders (supplied with solenoid controlled options) allows rotary tiller to be used on tractors with only 2 hydraulic duplex outlets  
     Response time is faster than tractor controls making it an excellent choice when frequent changes to deck position are required  
     Gauge wheels (supplied with float options) deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and deck  
    Additional Specifications:
     Deck Motor RPM: 1,000 rpm @ 540  
     Minimum Base Tractor Weight: 8,000 lbs. without added weights  
     Transport Width: 10 ft. (without gauge wheels)  
     Maximum Horizontal Reach (from center tractor): 15 ft. 6 in. (186 in.)  
     Maximum Vertical Reach (above horizontal): 11 ft. 5 in. (137 in.)  
     Maximum Vertical Reach (below horizontal): 9 ft. 1 in. (109 in.)  
     Deck Rotating Arc: 180°  
     Blade Rotation: Clockwise  
     Blade Bolt: 1-1/2 in. with keyway; nut  
     Dishpan: 3/16 x 21 in. round, dish shaped  
     Speed Increaser Fluid: 80-90W EP gearlube  
     Hydraulic Fluid: Mobil 424  
     Reservoir Capacity and Filter: 35 gal. (conventional 10 Micron filter)  
     Hydraulic Fluid Flow Rate: 15 gpm (approx.)  
     Overload Protection: Hydraulic relief valve  
     Breakaway Protection: Hydraulic cylinder  
    Gauge Wheel Model
     Gauge Wheels: 13 x 5-6 semi-solid smooth tires with greasable caged roller bearings (3)  
     Height Adjustment: Ratchet jacks (2)  


     Solenoid controlled cylinders  
     Tractor connecting hoses  
     Operator protective shield  
    *Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.