2021 Kubota M Narrow Series M5N-091HDC12

Selling Price -

$75,000.00

2021 Kubota M5N-091HDC12 narrow tractor with factory cab with heat and A/C, radio, hydraulic shuttle shift, 170 hours, 2 rear remote valves, 94 HP, 78 PTO HP, emissions warranty active until 11/4/26 or 3000 hours

Information

2021 Kubota M Narrow Series M5N-091HDC12

M-Series specialty tractor features a Kubota-designed and Kubota-built V-3800-Tier IV engine, performance-matched to bring Kubota durability to the strenuous demands of specialty agricultural applications.Creeper options are available to add even more precision to specialty tasks, with a 36-speed creeper available on the M5N models and an 18-speed creeper option on the M4N-071 narrow.

Features may include:

TRANSMISSION
  • High productivity requires versatility, such as traveling at low or sustained speeds. This tractor's transmission has 12F x 12R speed (24F x 24R is available on M5N only), with six speeds in two ranges, making sure the right gear for the job is always available. The shuttle shift is electric over hydraulic, making direction changes a breeze. These tractors also have economy 540/540E PTO as standard equipment to save fuel and reduce noise when light duty jobs are being performed.
BI-SPEED TURNING
  • Kubota exclusive Bi-Speed turning is standard. When Bi-Speed is engaged, the front tires will rotate faster than the rear tires, pulling the front of the tractor around keeping a tight turning radius.
REDESIGNED CAB
  • To promote operator efficiency, the dash has been updated and contains a multi-function, multi-view intellipanel. All main controls are on the right hand side of the operator, while the steering wheel has 40 degrees tilt. Dual side mirrors and an easy access fuse box are standard.
IMPROVED HYDRAULICS
  • The M Series Narrow tractors have more standard rear remote valves than before, now offering 2 valves as standard. With 18.1 GPM flow (16.7 GPM for M4N), the tractor is ready to accept implements requiring multiple valves.

Photos

Highlights

  • $75,000.00
  • Milford
  • Pre-Owned
  • E054921
  • 2021
  • Kubota
  • M Narrow Series M5N-091HDC12
  • No. of speeds: F12 / R12
  • Available
  • KBUM6DDCCM8K51417

Specifications

  • 2021
  • Kubota
  • M Narrow Series
  • M5N-091HDC12
  • Utility
  • SAE J 1349: 87.5 HP (65.2 kW)
  • Turbocharged w/Intercooler
  • 4
  • Total: 230 cu. in. (3769 cc)
  • 2600 rpm
  • Direct Injection, water-cooled | Common Rail System
  • At Rated rpm (OECD CODE2): 78 HP (58.1 kW) | 540 / 540E rpm
  • Live-independent PTO, electro-hydraulic clutch with brake
  • 80 Amp
  • No. of speeds: F12 / R12
  • Main: 6 Speeds Synchronized | Shuttle: Electro Hydraulic Shuttle | Range Gear: High / Low Range Gear Shift
  • 4WD: Bevel Gear Type
  • Hydraulic Power Steering
  • Hydraulic wet disc
  • 8.0 - 16
  • 12.4 - 24
  • 22.2 mph (35.5 km/h)
  • System: Open Center
  • 3-point hitch: 24.9 gpm (94.5 l/min)
  • 3-point: Telescopic Stabilizers | Category: II
  • With Reclining, Arm Rest
  • Crop Clearance Front Axle: 14.6 in. (370 mm)
  • 155.5 in. (3950 mm)
  • Top of CAB: 90.2 in. (2290 mm)
  • Left Step to end of Right fender: 53.9 in. (1370 mm)
  • 83.9 in. (2130 mm)
  • w/o brake, w/Bi Speed: 12.5 in. (3.8 mm)
  • 20.1 gal. (76 l)
  • At 24 in. behind lift point (OECD): 3307 lbs. (1500 kg) | at 24 in. behind lift point (OECD): 2976 lbs. (1350 kg)
  • 5622 lbs. (2550 kg)
  • Control system: Position, draft (top link sensing) | No. of standard remote valves: 2 (Max 5) | Hood Type: Full open, Slanted, Steel | Pedal Type: Hanging
  • KBUM6DDCCM8K51417