2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW160PL-7

Information

2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW160PL-7

TAKE CONTROL.

Keep your loads level and under control through the entire lift process with the parallel linkage feature. An easy-to-use hydrostatic transmission and overall focus on enhanced comfort, versatility and safety will help you tackle even your toughest jobs.

Photos

Highlights

  • Brentwood, New Hampshire
  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel ZW160PL-7
  • Model: B4.5
  • Available
  • over tires outside tire: 8' 2" (2,500 mm) | Bucket: 8' 4" (2,535 mm)
  • Carry height of bucket pin at carry position: 1' 3" (385 mm) | to bucket hinge pin, fully raised: 13' 0" (3,975 mm) | Dumping clearance 45 degree, full height: 8' 8" (2,650) | Reach, 45 degree dump, full: 4' 8" (1,415 mm)

Specifications

  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel
  • ZW160PL-7
  • Medium
  • Model: B4.5
  • CUMMINS
  • 4 cycle water-cooled, direct injection
  • Turbocharger and intercooled
  • DPF+SCR system
  • 4
  • Maximum ECE R120 gross: 169 hp (126 kW) at 2,000 min-1 (rpm) | ISO 9249: 2007 net 166 hp (124 kW) at 2,000 min-1 (rpm)
  • ISO 14396: 2002 165 hp (123 kW) at 2,200 min-1 (rpm) | ISO 9249: 2007 net 163 hp (122 kW) at 2,200 min-1 (rpm)
  • ISO 9249: 2007 net 755 Nm at 1,200 min-1 (rpm)
  • 4.2" (107 mm)
  • 4.9" (124 mm)
  • Piston: 273.4 cu.in (4.46 L)
  • Two element dry type with restriction indicator
  • EPA Final Tier 4/EU stage V
  • 2 x 12 V
  • Sound level in cabin according to ISO 6396: 2008 67 LpA dB(A) | External sound level according To ISO 6395: 2008 and EU Directive 2000/14/EC 104 LwA dB(A)
  • Tread: 6' 4" (1,930 mm) | Loader clearance radius, bucket in carry position: 19' 10" (6,055 mm) | Lift arm clearance at max lift: 12' 1" (3,690 mm) | Max. roll back at carry position: 46° | Max. roll back at ground level: 43° | Roll back angle at full height: 59°
  • 25' 12" (7,915 mm) | without bucket: 21' 6" (6,565 mm)
  • up to cab top: 10' 9" (3,280 mm) | Overall operating height bucket full raise: 17' 4" (5,280 mm)
  • over tires outside tire: 8' 2" (2,500 mm) | Bucket: 8' 4" (2,535 mm)
  • 9' 10" (3,000 mm)
  • Minimum: 1' 5" (430 mm)
  • centerline of outside tire: 16' 8" (5,085 mm)
  • to inside of tires: 9' 5" (2,870 mm)
  • Carry height of bucket pin at carry position: 1' 3" (385 mm) | to bucket hinge pin, fully raised: 13' 0" (3,975 mm) | Dumping clearance 45 degree, full height: 8' 8" (2,650) | Reach, 45 degree dump, full: 4' 8" (1,415 mm)
  • Digging depth (horizontal digging angle): 0' 3" (80 mm)
  • Tank: 54.1 gal (205 L)
  • Engine: 5.3 gal (20 L)
  • Engine lubricant (including oil pan): 4.3 gal (16 L) | Front axle differential and wheel hubs: 6.6 gal (25 L) | Rear axle differential and wheel hubs: 6.6 gal (25 L) | DEF/AdBlue® tank: 4.8 gal (18 L)
  • Oil tank: 21.2 gal (80 L)
  • Operating With ROPS/FOPS Cab): 29,851 lb (13,540 kg)