2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW180-7

Information

2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW180-7

WORK WITH CONFIDENCE

The industry-leading cab on the ZW180-7 offers superior visibility so you can work confidently, productively and efficiently. Take control of your safety, comfort and uptime.

Photos

Highlights

  • Brentwood, New Hampshire
  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel ZW180-7
  • Model: B6.7
  • Available
  • over tires outside tire: 8' 3" (2,505 mm) | Bucket: 8' 4" (2,535 mm)
  • Carry height of bucket pin at carry position: 1' 4" (400 mm) | Height to bucket hinge pin, fully raised: 12' 11" (3,925 mm) | Dumping clearance 45 degree, full height: 8' 11" (2,710 mm) | Reach, 45 degree dump, full height: 3' 11" (1,205 mm)

Specifications

  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel
  • ZW180-7
  • Medium
  • Model: B6.7
  • Cummins
  • 4 cycle water-cooled, direct injection
  • Turbocharger and intercooled
  • DPF+SCR system
  • 6
  • Maximum ECE R120 gross: 173 hp (129 kW) at 2,200 min-1 (rpm) | ISO 9249: 2007 net 168 hp (125 kW) at 2,200 min-1 (rpm)
  • SO 14396: 2002 gross 173 hp (129 kW) at 2,200 min-1 (rpm) | ISO 9249: 2007 net 168 hp (125 kW) at 2,200 min-1 (rpm)
  • ISO 9249: 2007 net 1,104 Nm at 1,100 min-1 (rpm) | gross 1,120 Nm at 1,100min-1 (rpm)
  • 4.2" (107 mm)
  • 4.9" (124 mm)
  • Piston: 410.1 cu.in (6.69 L)
  • Two element dry type with restriction indicator
  • EPA Final Tier 4/EU stage V
  • 2 x 12 V
  • Sound level in cabin according to ISO 6396: 2008 67 LpA dB(A) | External sound level according to ISO 6395: 2008 and EU Directive 2000/14/EC 104 LwA dB(A)
  • Tread: 6' 4" (1,930 mm) | Loader clearance radius, bucket in carry position: 20' 2" (6,145 mm) | Lift arm clearance at max lift: 12' 0" (3,670 mm) | Max. roll back at carry position: 47° | Max. roll back at ground level: 43° | Roll back angle at full height: 60°
  • 26' 6" (8,085 mm) | without bucket: 22' 1" (6,725 mm)
  • up to cab top: 10' 10" (3,310 mm) | operating height bucket full raise: 17' 4" (5,280 mm)
  • over tires outside tire: 8' 3" (2,505 mm) | Bucket: 8' 4" (2,535 mm)
  • 10' 2" (3,100 mm)
  • Minimum: 1' 4" (400 mm)
  • centerline of outside tire: 17' 2" (5,235 mm)
  • to inside of tires: 9' 10" (2,995 mm)
  • Carry height of bucket pin at carry position: 1' 4" (400 mm) | Height to bucket hinge pin, fully raised: 12' 11" (3,925 mm) | Dumping clearance 45 degree, full height: 8' 11" (2,710 mm) | Reach, 45 degree dump, full height: 3' 11" (1,205 mm)
  • Digging depth (horizontal digging angle): 0' 3" (70 mm)
  • Tank: 60.7 gal (230 L)
  • Engine: 6.6 gal (25 L)
  • Engine: 6.6 gal (25 L)
  • Torque converter and transmission: 7.9 gal (30 L) | Front axle differential and wheel hubs: 8.2 gal (31 L) | Rear axle differential and wheel hubs: 9.0 gal (34 L) | DEF/AdBlue® tank: 6.6 gal (25 L)
  • Oil tank: 26.4 gal (100 L)
  • Operating With ROPS/FOPS Cab: 32,959 lb (14,950 kg)