2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW220-6

Information

2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW220-6

COMFORT, SAFETY AND PRODUCTIVITY ALL IN ONE MACHINE.

Smaller than the ZW250-6, the Hitachi ZW220-6 was also inspired by your demands for exceptional productivity at the lowest possible cost of ownership. You get the same focus on the environment and operator comfort and safety, just in a slightly smaller package. But don’t let its size fool you, it’s as hardworking as any Hitachi wheel loader.

Photos

Highlights

  • Brentwood, New Hampshire
  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel ZW220-6
  • Model: QSB6.7
  • #2 Diesel (Requires ultra-low sulfur fuel.)
  • Available
  • Max. hinge pin: 13'5" (4,090 mm)

Specifications

  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel
  • ZW220-6
  • Medium
  • Model: QSB6.7
  • Gross power (ISO 14396): 200 HP/1,600 RPM (149 kW/1,600 RPM) | Net power (ISO 9249): 194 HP/1,600 RPM (145 kW/1,600 RPM)
  • Cummins
  • 4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler | Module type: Hydraulic-driven, suction-type fan, pressurized radiator
  • 6
  • 4.2" (107 mm)
  • 4.8" (124 mm)
  • Total: 408 in3 (6.69 liters)
  • Dry type (double element)
  • Motor: DC 24V-10.6 HP (7.8 kW)
  • EPA Tier 4 Final/EU Stage IV Certified
  • #2 Diesel (Requires ultra-low sulfur fuel.)
  • Pump: Electronically controlled, common rail type
  • All speed electrical type
  • DC 12V-1,000 CCA (108 Ah), 2 units
  • DC 24V-65A (1.56 kW)
  • Maximum dumping clearance: 9'6" (2,890 mm) | Dumping reach (to front of bucket edge or tooth): 3'8" (1,130 mm) | Bucket tiltback angle at ground level: 50° | at carry position: 50° | Tread: 7'1" (2,160 mm) | Clearance Circle (bucket carry position) at outside of bucket: 22'10" (6,960 mm) | at outside of tire: 20'9" (6,325 mm) | Full articulation angle: 37°
  • Max. hinge pin: 13'5" (4,090 mm)
  • Digging depth (with bucket level): 4" (100 mm)
  • 27'3" (8,310 mm)
  • up to cab top: 11' (3,375 mm) | bucket fully raised: 17'10" (5,440 mm)
  • outside tire: 9'2" (2,785 mm) | outside bucket: 9'7" (2,910 mm)
  • 10'10" (3,300 mm)
  • Minimum: 1'6" (450 mm)
  • Tank (diesel fuel): 67.4 gal / 255 L
  • Engine lubricant (including oil pan): 6.6 gal / 25 L | T/M: 7.1 gal / 27 L | Axle (front/rear): 8.5/8.5 gal - 32/32 L | DEF/AdBlue® tank: 6.6 gal / 25.1 L
  • Engine: 8.7 gal / 33 L
  • Oil tank: 30.1 gal / 114 L | Hydraulic system (including hydraulic tank): 48 gal / 180 L
  • Operating (with ROPS cab): 38,912 lb (17,650 kg)