2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW220-7

Information

2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW220-7

MORE PRODUCTIVITY. LOWER OWNERSHIP COST.

Inspired by your demands for exceptional productivity at the lowest possible cost of ownership, the ZX220-7 offers industry-leading efficiency, comfort and safety.

Photos

Highlights

  • Brentwood, New Hampshire
  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel ZW220-7
  • Model: B6.7
  • Available
  • over tires outside tire: 9' 3" (2,825 mm) | Bucket: 9' 7" (2,910 mm)
  • Carry height of bucket pin at carry position: 1' 5" (430 mm) | Height to bucket hinge pin, fully raised: 13' 5" (4,080 mm) | Dumping clearance 45 degree, full height: 9' 2" (2,800 mm) | Reach, 45 degree dump, full height: 4' 0" (1,220 mm)

Specifications

  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel
  • ZW220-7
  • Medium
  • Model: B6.7
  • Cummins
  • 4 cycle water-cooled, direct injection
  • Turbocharger and intercooled
  • DPF+SCR system
  • 6
  • Maximum ECE R120, gross 210 hp (157 kW) at 1,900 min-1 (rpm) | ISO 9249: 2007, net 204 hp (152 kW) at 1,900 min-1 (rpm)
  • ISO 14396: 2002 200 hp (149 kW) at 2,200 min-1 (rpm) | ISO 9249: 2007 193 hp (144 kW) at 2,200 min-1 (rpm)
  • 990 Nm at 1,300 min-1 (rpm)
  • 4.2" (107 mm)
  • 4.9" (124 mm)
  • Piston: 410.1 cu.in (6.69 L)
  • Two element dry type with restriction indicator
  • EPA Final Tier 4/EU stage V
  • 2 x 12 V
  • Sound level in cab according to ISO 6396: 2008 LpA 68 dB(A) | External sound level according to ISO 6395: 2008 and EU Directive 2000/14/EC LwA 105 dB(A)
  • Tread: 7' 1" (2,160 mm) | Loader clearance radius, bucket in carry position: 22' 11" (6,980 mm) | Lift arm clearance at max lift: 12' 4" (3,770 mm) | Max. roll back at carry position: 47° | Max. roll back at ground level: 43° | Roll back angle at full height: 60°
  • 27' 11" (8,520 mm) | without bucket: 23' 4" (7,110 mm)
  • up to cab top: 11' 1" (3,370 mm) | operating height bucket full raise: 18' 1" (5,500 mm)
  • over tires outside tire: 9' 3" (2,825 mm) | Bucket: 9' 7" (2,910 mm)
  • 10' 10" (3,300 mm)
  • Minimum: 1' 6" (430 mm)
  • centerline of outside tire: 19' 9" (6,010 mm)
  • to inside of tires: 11' 7" (3,530 mm)
  • Carry height of bucket pin at carry position: 1' 5" (430 mm) | Height to bucket hinge pin, fully raised: 13' 5" (4,080 mm) | Dumping clearance 45 degree, full height: 9' 2" (2,800 mm) | Reach, 45 degree dump, full height: 4' 0" (1,220 mm)
  • Digging depth (horizontal digging angle): 0' 4" (110 mm)
  • Tank: 67.3 gal (255 L)
  • Engine: 7.7 gal (29 L)
  • Engine: 6.6 gal (25 L)
  • Torque converter and transmission: 7.1 gal (27 L) | Front axle differential and wheel hubs: 8.4 gal (32 L) | Rear axle differential and wheel hubs: 8.4 gal (32 L) | DEF/AdBlue® tank: 6.6 gal (25 L)
  • Oil tank: 30.1 gal (114 L)
  • Operating: 40,109 lb (18,190 kg)