Chappell Tractor

  • 251 NH-125
  • Brentwood, NH 03833
  • Call Us: (603) 642-5666
  • https://www.chappelltractor.com/
Print This Page

2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW370-6 HC

Information

2024 Hitachi Construction Machinery Medium to Large Construction Equipment Wheel ZW370-6 HC

HIGH CAPACITY FOR LOADS OF TOUGH WORK

Big jobs come with big demands. The Hitachi ZW370-6 HC is built for the biggest and toughest working conditions, bringing high-capacity capabilities to the jobsite to maximize your productivity. This wheel loader has the safety and convenience features you expect from Hitachi, with the size to perform on big scales.

Photos

Highlights

  • Brentwood, New Hampshire
  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel ZW370-6 HC
  • Model: 6WG1
  • #2 Diesel (Requires ultra-low sulfur fuel.)
  • Available
  • Max. hinge pin: 15'4" (4,660 mm)

Specifications

  • 2024
  • Hitachi Construction Machinery
  • Medium to Large Construction Equipment Wheel
  • ZW370-6 HC
  • Medium
  • Model: 6WG1
  • Gross power (ISO 14396): 389 HP/1,800 RPM (290 kW/1,800 RPM) | Net power (ISO 9249): 386 HP/1,800 RPM (288 kW/1,800 RPM)
  • Isuzu
  • 4-cycle, water-cooled, direct injection with turbocharger and air cooled intercooler | Module type: Hydraulic-drive, heat-sensing, pressurized radiator
  • 6
  • 5.8" (147 mm)
  • 6.2" (154 mm)
  • Total: 957 in3 (15.68 liters)
  • Dry type (double element)
  • Motor: DC 24V (7.0 kW)
  • EPA Tier 4 Final/EU Stage IV Certified
  • #2 Diesel (Requires ultra-low sulfur fuel.)
  • Pump: Electronically controlled, common rail type
  • All speed electrical type
  • DC 12V-1,170 CCA (200 Ah), 2 units
  • DC 24V-110A (2.64 kW)
  • Maximum dumping clearance: 10'8" (3,275 mm) | Dumping reach (to front of bucket edge or tooth): 4'10" (1,465 mm) | Bucket tiltback angle at ground level: 41° | at carry position: 50° | Tread: 8'3" (2,500 mm) | Clearance Circle (bucket carry position) at outside of bucket: 26'3" (7,990 mm) | at outside of tire: 21'8" (6,635 mm) | Full articulation angle: 37°
  • Max. hinge pin: 15'4" (4,660 mm)
  • Digging depth (with bucket level): 5" (130 mm)
  • 32' (9,720 mm)
  • up to cab top: 12'3" (3,735 mm) | bucket fully raised: 21'6" (6,545 mm)
  • outside tire: 11'2" (3,380 mm) | outside bucket: 12'5" (3,770 mm)
  • 17" (430 mm)
  • Minimum: 15" (440 mm)
  • Tank (diesel fuel): 115.7 gal / 438 L
  • Engine lubricant (including oil pan): 13.7 gal / 52 L | T/M & T/C: 18.7 gal / 71 L | Axle (front/rear): 25.1/25.1 gal - 95/95 L | DEF/AdBlue® tank: 15.0 gal / 57 L
  • Engine: 18.2 gal / 69 L
  • Oil tank: 47.0 gal / 178 L | Hydraulic system (including hydraulic tank): 77.9 gal / 295 L
  • Operating (with ROPS cab): 79,210 lb (35,920 kg)