2023 Yanmar V Series V12

2023 Yanmar V Series V12

Swipe to View More

  • Year 2023
  • Make Yanmar
  • Model V Series
  • Engine Model: TCD 3.6 L4
2023 Yanmar V Series V12

2023 Yanmar V Series V12

2023 Yanmar V Series V12

Engine

Engine Model: TCD 3.6 L4
Engine Type 4-stroke
Engine Manufacturer Deutz
Engine Power Net rating at 2,200 rpm (SAE J 1349): (100 hp) 74.4 kW
Engine Torque Max: 221 lb ft (300 Nm) @ 1,600 rpm
Displacement 220 in3 (3,600 cm3 )
Cooling Intercooler, Water
Cylinder Liners 4 in line
Exhaust gas optimised
Emissions EPA Tier 4 Final / EC stage III B
Starter 12 V / 3.5 hp (2.6 kW) | Cold-starting aid: Glow plugs

Fuel System

Fuel Type Turbo diesel
Fuel System Common Rail

Drivetrain

Transmission Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm
Steering Articulated, 2 steering cylinders with final positioning damping on both sides, fully hydraulic through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Gear Ratio (Primary) Low: 0-3.7 / 0-11.8 mph (0-6 / 0-19 kph) | High: 0-6.8 / 0-22 mph (0-12 / (0-36 kph)

Brakes

Brake System Type Service: Hydraulically actuated center-mounted disc brake, acting on all 4 wheels via 4-wheel drive | Auxiliary: Hydrostatic drive provides dynamic braking
Parking Brake Mechanically actuated center-mounted disc brake on front axle

Wheels & Tires

Tires, Front Specification 405/70 R 20 SPT 9 Dunlop
Tires, Rear Specification 405/70 R 20 SPT 9 Dunlop

Battery

Battery 12 V / 100 Ah

Electric

Electrical Nominal voltage: 12 V
Generator 14 V / 95 A

Operational

Operating Conditions Breakout force at bucket edge (SAE J 732): 13,264 lbf (59,000 N)

Performance

Noise Level Cab exterior: 101 dB (A) | Cab interior: 74 dB (A)

Hydraulics

Hydraulic Pump Max: 20 gpm (78 l/min)
Maximum Pressure Max Working: 3,625 psi (250 bar)

Dimensions

Dimensions Load center from fork attachment point: 22" (560 mm) | Total steering angle: 80 deg.
Height Total (top of cab): 9' 1" (2,780 mm)
Length Total, bucket on ground: 17' 11" (5,480 mm) | fork tines 4" x 1.8" (100 mm x 45 mm): 44" (1,120 mm)
Width Total: 6' 11" (2,100 mm) | of fork carrier: 49" (1,240 mm)
Turning Radius at outside bucket edge: 15' 4" (4,680 mm)
Wheelbase 7' 6" (2,290 mm)

Capacities

Volume General-purpose bucket (SAE J 742): 1.57 yd3 (1.20 m3 )
Oil capacity Engine: 2 gal (8 l)
Fuel Capacity Tank: 29 gal (110 l) | AD Blue Tank: 2.6 gal (10 l)
Cooling System Engine: 3.9 gal (15 l)
Hitch Lift Capacity at ground level (SAE J 732): 15,962 lbf (71,000 N)
Hydraulic Capacity 25 gal (93 l)
Load Capacity, Land Tipping, straight at full reach (ISO 14397-1): 11,023 lbs (5,000 kg) | Tipping, articulated at full reach (ISO 14397-1): 9,700 lbs (4,400 kg) | Operating load (SAE J 1197) over the total lift and steering range: 4,188 lbs (1,900 kg) | Operating load in transport position, above ground level, total steering range: 6,834 lbs (3,100 kg)

Weights

Weight, In Running Order (SAE J 1197): 15,432 lbs (7,000 kg)

Lights and Safety

Lighting system in compliance with US/ISO standards, H7 headlamps

Features

Features Axles: Rigid front axle with 45% limited slip differential. Oscillating rear axle with 45% limited slip differential. Center-mounted disc brake. Rear axle weights, 661 lbs (300 kg) are standard. | Stability factor: 2

Product Photography